<
>
<
>
MVP10 ventilator
Ref: 45490105044
Ideal for neonatal ventilation
Ventilation ensured in controlled pressure mode
Adapted to emergency situations
Compact, mobile and lightweight
Multipurpose and without electronics pneumatic ventilator
All information on this product
The MVP-10 Ventilator is for respiratory support of neonatal and pediatric patients both in hospital and during transport. It is intended primarily for use in all applications requiring tidal volumes in the range up to 660 milliliters. It may be used with a wide range of I/E ratios, including inspiratory time greater than expiratory time.
Readily usable with standard accessory humidifier, oxygen blender, oxygen analyzer and pressure alarms.
Differents ventilation modes :
- Built-in PEEP
- IPPV, IMV
- CPAP
- COAD
Prevention of CO2 build-up by constant flow wash-out
Specifications
- Gas Supply : 50±5 psi (no battery required)
- Inspiratory Time (calibrated) : Range: 0.2 to 2 seconds
- Expiratory Time (calibrated) : Range: 0.25 t o 2.5 seconds
- IMV Range : 2.5 to 30 seconds
- Respiratory rate : 0 to 120 cycles/minute
- I/E ratio : Variable
- Flowrate ( calibrated) : 0 to 20 LPM
- Tidal Volume : 0 to 666 mL
- Maximum Pressure : 0 to 70 cmH2O
- PEEP/CPAP : 0 to 18 cmH2O
- O2 Concentration : 21 to 100%
- Logic Gas Consumption : Approx. 4 LPM (O.14 SCFM)
Physical Characteristics
Size : 8" x 9" x 3" (20.3 x 22.9 x 7.4 cm)
Weight : 5-1/8 lbs. (2.3 kg.)
Packing
- 1 MVP10 ventilator
- 1 Air supply hose
- 1 O2 supply hose
- 1 Fixing clamp
- 1 Infant lung test
- 2 Disposable patient circuits
- 1 Instructions Manual
Accessories
- Disposable Patient Circuit x 20 : Ref. 45490105202
- Reusable Patient Circuit : Ref. 45490105045
CE mark
Medical device IIb