cancel
check

You enter a space reserved for healthcare professionals.

In accordance with the French law n°2011‐2012 of December 29, 2011 relating to the reinforcement of the health security of the drug and the health products, click here to certify that you are a health professional and thus be authorized to access information.

I attest that I am a healthcare professional :

Products&services / Neonatology / Warming / Closed incubators
Back
image produit image produit image produit image produit image produit image produit
image produit

Satis 3352

Ref: 3552

Management of newborn warming

Regulation modes : air and skin

Quick and secure temperature increase

Preset hygrometry by conducting forced air on removable water tank

Feet-head ventilation system, a unique médipréma technology which does not disturb the air flow when the doors are opened or when the mattress tray is pulled out

Ergonomic and easy to use

Intuitive and simple control screen

Numerous accesses to the infant : 2 large lateral swivelling doors with portholes and a dual-leaf door on the the head side, orifices for easily passing sensors and pipes

Mattress tray with electrical and continuous head-up/feet-up tilt

Numerous storage areas

Perfect visibility of the infant

Spacious Canopy in PMMA without bisphenol with perfect visibility

Distortion-free visibility of the baby on all 5 sides

Ease of maintenance and hygiene

Each element easily accessible for disinfection

Steam and autoclave cleaning compatible

 Technical featuresFeatures
Contact us

All information on this product

The Satis 3552 closed incubator was designed to used in neonatal care and maternity units.

 

A reliable, robust incubator

Médipréma’s Satis 3552 closed incubator is robust, reliable and easy to use. Thanks to its transparent PMMA canopy, it ensures perfect visibility of the baby on 5 sides and an easy access to the baby thanks to its two large side-swivelling doors with portholes on the front and rear panel and a dual-leaf door on the head side.

A variable height adjustement model of the incubator is also available to optimise the working position of medical teams.

 

A reliable, easy-to-use thermoregulation system

Médipréma’s Satis 3552 closed incubator has a reliable thermoregulation system with two temperature regulation modes : air and skin.

Médipréma has designed a unique feet-head (and not frontal) ventilation system that directs warm air along the walls of the canopy, ensuring that the required temperature is maintained inside. It also ensures safe access to the baby when the doors are opened with no risk of burns.

SPECIFICATIONS

THERMAL REGULATION :

  • Air mode from 20 to 39°C (with secure access above 37°C)
  • Skin mode from 35 to 39°C (with secure access above 37°C)

Quick and secure temperature increase without exceeding the requested temperature. The use of Pt1000 Ohm platinum probes, which have almost zero time variability curve, assures the regulation system reliability

PRESET HYGROMETRY by conducting forced air on removablewater tank including visualized water level : mini 45% maxi 70% +/-10%

OXYGEN INLET

SOUND AND VISUAL ALARMS

HEATING POWER : 450W for 230V (absorbed power 600VA)

POWER SUPPLY : 220-240V 50/60Hz

ELECTRICAL CLASSIFICATION : CLASS I

SOUND LEVEL ≤ 45 ±3 dB(A)

CLASS IIB MEDICAL DEVICE

DESCRIPTION

TEMPERATURES DISPLAY WITH BIG DIGITS. Good visibility of the different parameters

SPACIOUS CANOPY (LxWxH 890x455x500mm) in PMMA without bisphenol, with perfect visibility on 5 sides and many accesses to the baby

  • Front panel with inclined side : 2 large lateral swivelling doors with 2 portholes
  • Rear panel with inclined side : 2 portholes
  • Head side : 1 two-leaf door

ERGONOMIC HINGE BOLTS allowing to significantly reduce the noise when opening the ports, to increase the visibility inside the canopy and to open the ports with elbows without hygiene fault

4 ORIFICES for easily passing sensors and pipes

COMFORTABLE BEDDING (LxWxH 620x390x30 mm)

TILT POSITION +/-10°

X-RAY CASSETTE LOCATION

FLOOR/BEDDING HEIGHT :

  • Fixed height : 930 mm
  • With the height adjustment option : 964/1164 mm

RAIL FOR ACCESSORIES on head side

4 SWIVELLING CASTORS diam.125 mm (2 with brake)

DIMENSIONS : LxWxH 985 x 560 x 1322 mm or 1024 x 602 x 1353-1553 mm (VHA model)

WEIGHT : 75 kg (VHA model)

 

OPTIONS & ACCESSORIES

  • Variable Height Adjustment (200 mm adjustment)
  • Internal ventilator hoses holder on removable plate
  • Double wall
  • O2 kit (0-15l/min flowmeter, humidifier and hoses)
  • Single patient or reusable skin probe
  • Repositionable hydrogel patches
  • IV pole with clamp
  • Swing aside tray
  • Sliding storage on feet side
  • U-shape bumper rail
  • Support for 2 cylinders
  • Examination LED light with dimmer
  • Night & Day canopy cover
  • Stretch mattress cover
  • Gel mattress
  • Microbeads positioning cushions 
  • Wrist / ankle fasteners

 

Class IIB Medical Device

Electrical Classification I

You will also like :

image produit

Leddy bloo

The Leddy Bloo phototherapy hood developed by médipréma offers the best possible combination between performance, surface exposure and treatment efficiency.

 

List title   back

List title   Back

List title   Back

List title   Back

List title   Back

This website uses cookies to measure its audience and to improve your user experience. By continuing to browse this site, you accept the use of these cookies.
More informations